These hand held hot plates, with dual heated surfaces, are designed for fusing plastic pipe, sheets and other plastic materials.
All models are surfaced with an abrasive-resistant Teflon coating. Temperature is thermostat-controlled and includes a thermometer to display the plate temperature. A 4ft line cord and insulated handle are standard.
Model HAN1202
Model HAN66
| Model | Dual heated surfaces | Specify Voltage | Power | note |
| Han 502 | 5 x 1.5 inches | 120 or 240V | 500 W | 1 handle |
| Han 1202 | 12 x 1.5 inches | 120 or 240V | 1000 W | 1 handle |
| Han 1802 | 18 x 1.5 inches | 120 or 240V | 1500 W | 1 handle |
| Han 66 | 6 x 6 inches | 120 or 240V | 500 W | 1 handle |
| Han 99 | 9 x 9 inches | 120 or 240V | 1000 W | 1 handle |
| Han 1212 | 12 x 12 inches | 120 or 240V | 1550 W | 1 or 2 handles |
A remote digital thermostat is optional at extra cost.
We make these hot plates in special sizes and shapes
|
|
|
Model HAN 2402 double-sided, teflon-coated
hot plate for butt-fusion welding of polyethylene sheets.
This 24 x 1.5 in. plate is controlled with an accurate, remote
digital thermostat, with an adjustable range of 70-400F,
with heat evenly distributed across all surfaces of the plate
|
HAN 2402
|
|
|
Butt Fusion Hot Plate,
144 x 5 inches. The plate is controlled with an accurate remote digital
thermostat. Surface uniformity is held to 2% of set point |
|
|
|
Model BF1212 aluminum hot plate has dual 12x12"
heated surfaces. The surfaces are furnished plain or
Teflon coated.
Temperature is controlled with a remote digital thermostat.
This model operates at 3600W, 240Vsingle phase
|
| Heated clamp shown with remote digital thermostat. May be powered with air cylinders to clamp heated Teflon surfaces around any rope-like circular object for bonding or sealing. |
Wenesco welcomes your inquiry regarding other sizes and shapes
