Return to Wave Solder Pots

Here's a Wenesco system that helps automate soldering procedures by feeding solder wire to your application or solder pot. 

wenesco auto soldering system

Model M21 is designed to feed a wide range of wire sizes at a controlled speed using hardened drive rolls.  This equipment may be used with a suitable level sensor to make up solder in your solder pot.

solder wire feeder

Model M21 may be remotely placed using 36-in. nylon tubing and customized brass tip to feed the solder to its destination.

wenesco wire bottom

wenesco solder switch

Solder Level Switch may be purchased separately

wenesco wave solder pot

Model M14 Wave Solder Pot shown with 10"x3" wave nozzle and a solder level switch that controls an automatic solder feeder. 

This equipment will be used in an automatic machine for soldering connectors.


TOP       Return to Wave Solder Pots

Wenesco, Inc.
4700 W. Montrose Avenue, Chicago, Illinois, 60641  USA
Telephone (773) 283-3004.      Toll-free: (800) 233-4430.      FAX: (773) 283-3787 

Email:  info@wenesco.com 
 Or fill in Form

Por Favor Comuniquese con Juan Hernandez : (773) 283-3004, ext 16

Microptik BV is our distributor serving Europe, the Middle East, Africa, and Asia.  Visit their site: www.wenesco.eu

All Contents 1998-2016, Wenesco, Inc                                                                                                                    Developed by The Web Author