Wenesco Vapor Phase Soldering

 

HOME     Soldering Equipment

Wenesco Vapor Phase soldering equipment features :

WB01372_.gif (406 bytes)Economical          WB01372_.gif (406 bytes)Easy to use             WB01372_.gif (406 bytes)Water cooled        
WB01372_.gif (406 bytes)Requires just one quart of soldering fluid         WB01372_.gif (406 bytes)Dual vapor zones

Suitable for lead free soldering

m10.jpg (20444 bytes)

Model M10 Vapor Phase.  $5,500.00

Model M10 w/optional "Auto-Mate" elevator.  $15,000.00

This "ozone friendly" equipment is ideally suited for lab or limited production vapor phase soldering.   All models are fully insulated with a stainless steel interior, drain valve, stainless steel cover, parts basket, and dripper bottle with valve.

Component overheating is virtually impossible because the fluid characteristics limit the maximum temperature attainable.   The vapor heats the component leads faster than the components. This principle produces a reduced component body temperature during soldering.

All types of PCB's and assemblies of virtually any configuration are heated evenly.

To read a PDF technical comparison study of reflow methods, click HERE

Model M10 is used for soldering assemblies up to 12.5 x 8.5 x 6 inches high, and is wired for your choice of 120V or 240V (1ph) at 3000W.

bullet

Heaters are automatically shut down if fluid tank is empty. 

bullet

Stainless steel fluid tank is fully insulated with a hinged cover,
and has no interior obstructions. A fluid drain valve is included.

bullet

Inside measures 24"H x 14W x 10D.  Outside, 28"H x 18W x 16D.

bullet

Long-handled basket is 13L x 9W x 2D

bullet

Dripper bottle with valve replenishes cover fluid automatically.

bullet

Operates with all popular soldering fluids, and any "ozone safe" cover fluid.

OPTIONS

bullet

Sensor to shut down heaters if cooling water flow is interrupted.

bullet

Operation at 208V (1ph)

OPTIONAL "AUTOMATE" VERTICAL CONVEYOR Model A66 is driven with a VARI-SPEED motor and includes 3 DWELL TIMERS for preheat in the cover zone, soldering in the hot vapor zones, and cool down in the cover zone.


Wenesco also has larger models; please consult factory office.

Model M13 vapor phase with 19 x 16 inch top opening     $10,200.00

TOP

Wenesco, Inc.
4700 W. Montrose Avenue, Chicago, Illinois, 60641  USA
Telephone (773) 283-3004.      Toll-free: (800) 233-4430.      FAX: (773) 283-3787 

Email:  info@wenesco.com 
 Or fill in Form

Por Favor Comuniquese con Juan Hernandez : (773) 283-3004, ext 16

Microptik BV is our distributor serving Europe, the Middle East, Africa, and Asia.  Visit their site: www.wenesco.eu

All Contents 1998-2016, Wenesco, Inc                                                                                                                    Developed by The Web Author